ADTS Product SelectorAdvanced Pitot Static Testing solutions for aviation
Druck, a Baker Hughes business, is one of the world's leading suppliers of "Pitot Static Testers" known as "ADTS" (Air Data Test Sets). With more than 50 years of dedicated experience in the design and manufacture of advanced pressure measurement solutions. Our technologies play a vital role in ensuring aircraft operate efficiently.Druck's ADTS range are used to test and verify airspeed and altitude on aircraft pitot-static systems, from global airlines and militaries to light aircraft and business jet owners to MRO (Maintenance Repair Overhaul) organisations.Our ADTS 500 Series is perfect for commercial aviation, available in two, three, or four channels: ADTS 552, 553, and 554 all providing high-accuracy air data validation leak testing, fault finding and avionics instrumentation testing. The 405 MkII brings reliability and high accuracy into our highest performance pitot static test set.The rugged, compact design has evolved with continuous research and development from customer feedback. The combination of technical heritage, innovation and global service support enables us to create solutions to fit any customer's needs.Use our simple product selector to identify which product suits your needs below
Air Data Test Set 405 MkIIPitot Static TestersThe ADTS 405 MKII series is a proven world leader and industry standard specified by many: National and international civil airlines Military forces Aircraft manufacturers Ground support organisations Corporate fleet owners The ADTS 405 MKII is a twin-channel Ps and Pt pressure control system used for the precision calibration/ verification of aircraft pitot statics, compliant with RVSM (Reduced Vertical Separation Minima) requirements. Fully programmable for a wide range of fixed or rotary wing aircraft operating envelopes, the ADTS 405 MKII enables vital flight instrumentation, such as altimeters, airspeed indicators, rate of climb indicators, Mach meters and air data computers to be accurately and rapidly tested. A remote control hand terminal enables the instrument to be driven from the cockpit or flight deck by a single operator.Product DetailsThe ADTS 405 MkII brings reliability and high accuracy into our highest performance air data test set. The rugged, compact design has evolved due to Druck's continuous research and development, customer feedback and the experience gained from manufacturing thousands of automatic pressure controllers.Features and benefitsHigh accuracy TERPS® sensor suitable for testing RVSM aircraftFlightline and rack mount versionsCivil and military specificationIntegral or remote pressure/vacuum suppliesFully programmable for aircraft typeProtection for aircraft instrumentsFully CE and ROHS II compliantProduct Datasheets
Air Data Test Sets 405 MkII Datasheet
Air Data Test Sets 405 MkII Upgrade
Contact our teamRequest a demoPortal
Air Data Test Set 542 FL 280Pitot Static TestersThe ADTS 542F pitot static tester provides a smarter way to perform aircraft maintenance, troubleshooting, fault-finding and emergency aircraft on ground instrumentation validation.Product DetailsA small, lightweight and cost-effective portable two-channel Flightline air data test set for 'Aircraft on the Ramp' testing. Provides pitot static air data validation, leak testing fault finding and avionics instrumentation testing.Features and benefits
Portable, compact, robust, self-contained for flightline aircraft pitot static validation
TERPS pressure sensor accuracy
Wireless communication with ADTS Touch hand terminal to use, resulting in no cables running to the cockpit
Low air speed option for helicopters
Product Datasheets
ADTS 542F Datasheet
Contact our teamRequest a demoPortal
Air Data Test Set 542 FL 550Pitot Static TestersThe ADTS 542F pitot static tester provides a smarter way to perform aircraft maintenance, troubleshooting, fault-finding and emergency aircraft on ground instrumentation validation.Product DetailsA small, lightweight and cost-effective portable two-channel Flightline air data test set for 'Aircraft on the Ramp' testing. Provides pitot static air data validation, leak testing fault finding and avionics instrumentation testing.Features and benefits
Portable, compact, robust, self-contained for flightline aircraft pitot static validation
Wireless communication with ADTS Touch hand terminal to use, resulting in no cables running to the cockpit
Low air speed option for helicopters
Product Datasheets
ADTS 542F Datasheet
Contact our teamRequest a demoPortal
Air Data Test Set 552FPitot Static TestersThe ADTS 552F pitot static tester provides a smarter way to perform aircraft maintenance, troubleshooting, fault-finding and emergency aircraft on ground instrumentation validation.Portable two-channel flightline air data test set with large pitot static volume capability for use on a wide range of aircraft from light aircraft to wide body passenger and freight aircraft. Provides pitot static air data validation, leak testing, fault finding and avionics instrumentation testing.Product DetailsFeatures and benefitsPortable, compact, robust, self-contained for flightline aircraft pitot static validationTERPS pressure sensor accuracy, enables aircraft RVSM validationWireless communication with ADTS Touch hand terminal to use, resulting in no cables running to the cockpitLow air speed option for helicoptersLarge pressure and vacuum pumps high ROC into a typical aircraft volume650 kts airspeed and 60,000 ft altitude range, ideal for all civilian aircraftExtended range - optimal altitude range of 65,000 ftProduct Datasheets
ADTS 552F Datasheet (550 Series)
Contact our teamRequest a demoPortal
Air Data Test Set 553FPitot Static TestersThe ADTS 553F pitot static tester provides a smarter way to perform aircraft maintenance, troubleshooting, fault-finding and emergency aircraft on ground instrumentation validation.Portable three-channel flightline Air Data Test Set. Provides pitot static air data validation leak testing, fault-finding and avionics instrumentation testing. The two static channels in addition to a pitot channel make this unit ideal for aircraft fitted with a smart probe requiring angle attack validation. The ADTS 553F can also be used as 2-channel pitot static tester by selection in the set up menu on the ADTS Touch.Product DetailsPortable, compact, robust, self-contained for flightline aircraft pitot static validationTERPS pressure sensor accuracy, enables aircraft RVSM validationWireless communication with ADTS Touch hand terminal to use, resulting in no cables running to the cockpitLow air speed option for helicoptersLarge pressure and vacuum pumps high ROC into a typical aircraft volume650 kts airspeed and 60,000 ft altitude range, ideal for all civilian aircraftExtended range - optimal altitude range of 65,000 ftThree controlled channels (pt, Ps1 and Ps2)Angle of Attach (AoA) validation in addition to two channelsAircraft test program option productivity for Embraer 170 and 190Product Datasheets
ADTS 553F Datasheet (550 Series)
Contact our teamRequest a demoPortal
Air Data Test Set 554FPitot Static TestersThe ADTS 554F pitot static tester provides a smarter way to perform aircraft maintenance, troubleshooting, fault-finding and emergency aircraft on ground instrumentation validation.Portable four-channel flightline Air Data Test Set. In three-channel mode it provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing. The two static channels in addition to a pitot channel make this unit ideal for aircraft fitted with a smart probe requiring angle of attack validation. The ADTS 554F can also be used as a standard two-channel flightline air data test set or two simultaneous two-channel Air Data Test Sets.Product DetailsThe ADTS554F, supplied with an ADTS Touch, is a multipurpose 4-channel portable, self-contained pitot static tester. By selection in the set up menu on the ADTS Touch, the ADTS554F:
Operates as a 2-channel pitot static tester with the same capability as the ADTS552F
Operates as a 3-channel pitot static tester with the same capability as the ADTS553F.
Operates as two independent 2-channel pitot static testers for simultaneous testing of two pitot static systems.
DPI610E AeroPortable aircraft leak testerThe DPI610E-Aero is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems.Configured as a single channel unit for testing either altitude
or airspeed parameters, it is fully self-contained with manual
pressure and vacuum generation and venting facilities.
Scaling is provided in aeronautical units and the instrument
also includes leak and switch tests as well as other functions.The pneumatics system in the DPI610E-A limits both the
maximum rate of climb and descent to protect connected
delicate aircraft instrumentation such as Rate of Climb
(RoC) meters.With standard 5m length aero hose (6mm bore) and RoC
meter attached with a total volume of 1 litre the maximum
rate of climb is +/-6000 ft/min.Pressure fitting is a choice of AN4, AN6, Hansen or Staubli
quick-fit connection which includes an integral valve for letdown
to ambient ground pressure conditions.Product DetailsFeatures and benefits
Quick,simple and easy leak test of pitot and ADC systems
Designed to support AMM operations in addition to 'on stand' testing
ROC limits to ensure protection of avionic equipment
Long battery life to ensure all day operation
Grab and go kit
Ensures costly ADTS units remain available for scheduled maintenance tasks
Aeronautical and conventional measurement unit support
Altitude and airspeed leak testing and calibration
Altitude and airspeed switch testing and calibration
Integral pressure/vacuum pump
Accuracy to 11ft and 0.15kts
Large, task oriented display
Altitude and airspeed display for calibration checking
USB connection for data log transfer
Product Datasheets
DPI610E Aero
Contact our teamRequest a demoPortal
PACE 6000 ADCModular pressure controllerA cost-effective solution for your calibration needs.The PACE6000-ADC Air Data Calibrator is a twin-channel Ps and Pt pressure control system used for the precision calibration/verification of aircraft pitot-statics, compliant with reduced vertical separation minima (RVSM) requirements.A separate pressure/vacuum supply unit type PV 103 provides suitable pneumatic supplies.Fully programmable for a wide range of fixed or rotary wing aircraft, the PACE6000-ADC enables vital flight instrumentation, such as altimeters, airspeed indicators, rate of climb indicators, Mach meters and air data computers to be quickly and accurately tested.The PACE6000-ADC Air Data Calibrator has been designed for 483 mm (19 in) rack mounting and being only 132 mm (5.2in) (3U) high with a range of IEEE 488 interfaces available it is ideal for use with existing automatic test equipment (ATE) systems.The new PACE pneumatic modular pressure controller brings together the latest control and measurement technology from Druck to offer an elegant, fast, flexible and economical solution to pressure control for automated production or test and calibration applications.Product DetailsDruck's PACE6000-ADC Air Data Calibrator has the same market leading performance in terms of speed to setpoint, control stability, sensor accuracy and volume control as the rest of the PACE range.Due to the unique and flexible self-contained control module system, units can be reconfigured and expanded quickly and easily to meet any application requirements.PACE6000-ADC Air Data Calibrator can be seamlessly integrated into automated systemsThe PACE6000-ADC Air Data Calibrator also ensures safe operation with go to ground capabilities to avoid damage to the device under test. Product Datasheets
PACE 6000 ADC Datasheet
Contact our teamRequest a demoPortal
Air Data Test Set 405Pitot Static TestersThe ADTS 405 MKII series is a proven world leader and industry standard specified by many: National and international civil airlinesMilitary forcesAircraft manufacturers Ground support organisations Corporate fleet owners The ADTS 405 MKII is a twin-channel Ps and Pt pressure control system used for the precision calibration/ verification of aircraft pitot statics, compliant with RVSM (Reduced Vertical Separation Minima) requirements. Fully programmable for a wide range of fixed or rotary wing aircraft operating envelopes, the ADTS 405 MKII enables vital flight instrumentation, such as altimeters, airspeed indicators, rate of climb indicators, Mach meters and air data computers to be accurately and rapidly tested. A remote control hand terminal enables the instrument to be driven from the cockpit or flight deck by a single operator.Product DetailsThis is a compact, 50 cm (19 in) rack mounting unit for laboratory or workshop use. It is ideal for integration with ATE systems, or simply for use as a convenient bench top tool. Pneumatic connections are available via either the front or rear panel to suit specific applications. An optional matched pressure/vacuum supply unit (PV103R) is available as a separate rack module.
Product DatasheetsContact our teamRequest a demoPortal
PACE TallisTransfer Standard CalibratorThe portability of PACE Tallis means remote, sub-optimal locations, such as airfields, are now accessible for calibration with reduced risk of damage during transport due to the robust build of the unit.The high accuracy, precision and stability specification of PACE Tallis makes it an ideal reference standard for use to calibrate Druck ADTS units. Once connected to the PACE Tallis and the calibration procedure has been set up, the ADTS calculates and corrects for the offset (zero), slope (span) and non-linearity to optimise the overall uncertainty for the ADTS. (ADTS 405 MkII only at present).Product DetailsTotal accuracy of 3 Pa / 0.03 mbar with Druck TERPS resonating silicon technologyConfigurable to fit a wide range of applications, with 1, 2 or 3 reference sensors from 200 kPa to 21.1 MPaFull-featured yet simple to use platform, from laboratory barometer to working calibration standardCompact, robust transfer standard, ideal for in-situ testing and interlaboratory comparisonVersatile, maintains performance with a wide range of environmental conditions and test mediaPrecision of 10 ppm FSLong term stability of up to 15 ppm FS per yearBarometric reference optionProduct Datasheets
PACE Tallis Datasheet
Contact our teamRequest a demoPortal
Aftermarket and MRODruck is renowned and proud of the quality of our products and offer aftermarket support from our experienced inhouse team should you need any assistance or advise with our products in the field.We also offer direct supply of sensors for aftermarket and MRO (Maintenance Repair Overhaul) for a selection of our OEM parts.The combination of our technical heritage, innovation and global service support enable us to create solutions to fit any customer’s needs.From light aircraft owners through MRO (Maintenance Repair Overhaul) organisations to global airlines and many of the world’s militaries, Druck has a solution for every customer.Built upon Druck technology, our range of Air Data Test Sets are the pinnacle of aircraft testing and calibration. Our many years of experience have resulted in our ADTS 500 series and our new ADTS 405 MkII being the highest quality pitot static testers available.All models provide 0.01% accuracy, so you can be confident that your aircraft are operating with pinpoint precision and accuracy.
Get in touchFor all enquiries please contact usGet in touch
Why Druck?Manufacturing
Druck manufactures all components of PACE onsite at our HQ in LeicesterEngineeringWe have a heritage of engineering excellence to ensure only the highest quality units are madeService CentresNot only does Druck manufacture all units in-house, we also offer calibration and repairs servicing for all PACE units