Image
Image
main image
Eyebrow
Success stories

Druck pressure sensors aid climate change discoveries

2 min read


Customer type: Manufacturer of marine instruments

Industry: Scientific research into ocean temperature to provide key data for understanding and predicting climate change 

Application: Pressure measurement for depth control in free floating data collection buoys

Solution: High pressure titanium bespoke PDCR1830 depth and level sensor in a 17.5 mm package

 

Druck’s Customer

Druck’s customer is one of the largest manufacturers of marine instruments. The Company, based in the United States, offers products for the measurement of salinity, temperature, pressure, dissolved oxygen, and related oceanographic parameters in marine water.

 

Druck’s Customer’s challenge

Argo is an international program, that deploys free floating buoys (floats) to provide real time observations of the world’s oceans. The floats measure both temperature and salinity in the upper 2000 meters (m) of the ocean, providing key data for understanding and predicting climate change.

 

Image
cross section
Picture 1: Cross section of a float: photograph argo.ucsd.edu

Each float carries a sensor in order to measure the water’s temperature, salinity and pressure (depth). 

Druck’s customer required a corrosion resistant, low power, highly accurate, long-term stable pressure sensor to provide reliable pressure readings from the floats. 

Long term deployment in marine environments required the sensor and the instrument in which the sensor is housed to be highly resistant to corrosion. It therefore seemed logical to choose titanium as the material selection for the instrument, as well as the pressure sensor to avoid a galvanic corrosion between dissimilar metals.  At a deployment depth of 2,000 metres (6,561 feet) this requires a 200 bar sensor which is unusually high for a sensor made with titanium.  

The longer the floats can be active in service the lower the cost of each data point, therefore it was essential for the sensor to work accurately at the required depth for the entire deployment and use as little power as possible to provide depth readings without exhausting the float’s energy store.

Druck’s solution 

The Druck team conducted a full analysis of this customer challenge and determined that the standard PDCR1830 could be adapted with a new module designed within the sensor to work at high pressures.  This involved working closely with our suppliers to select the best grade of titanium to survive this high-pressure environment. 

 

Image
pdcr 1830
Picture 2: PDCR1830 Pressure Transducers

The accuracy and low power consumption of the bespoke product supplied by Druck has enabled the Argo float program to supply critical data to governments universities and people who live by the sea.

Druck’s added value

Druck’s high stability, low power consumption and robust design of its piezoresistive pressure sensors has enabled the customer to supply reliable long-lasting Argo floats to the measurement program for over 10 years.

The ability to deploy the floats for extended periods considerably lowers the cost of maintaining the them.  The more floats that are deployed the more complete the data set and the more accurate the predictions of future trends.  The equivalent of the entire UK domestic electricity usage is being used to heat the oceans for the last 30 years. The Argo Float program and the PDCR1830 make it possible for us to know this.

 

Find out about Druck's customised product offerings 

Find out more information about Druck on LinkedIn

Enabling cost effective flood defences by the creation of more accurate wave modeling


Fragen Sie den Experten.

Ihre Anfrage wurde abgeschickt.
Vielen Dank für Ihr Interesse. Ein Experte wird sich in Kürze mit Ihnen in Verbindung setzen.