Baker Hughes Legal Information: Copyright, Trademarks and Patents
This page reviews the copyright, trademark, and patent information for Bently Nevada, a Baker Hughes business.
BAKER HUGHES COPYRIGHT INFORMATION
Copyright 2024 Baker Hughes Company. All rights reserved.
BAKER HUGHES TRADEMARK INFORMATION
Bently Nevada and Orbit Logo are registered trademarks of Bently Nevada, a Baker Hughes business, in the United States and other countries.
The following are also registered trademarks of Bently Nevada in the United States and other countries.
- 6PACK RECORDINGS
- ADAPT
- ADRE
- ANOMALERT
- ARMS Reliability
- ASCENT
- BENTLY BALANCE
- BENTLY HOST
- BENTLY NEVADA
- BOPONLINE
- COMMTEST
- COMMTEST ASCENT
- DYNAMIC DATA MANAGER
- FLUIDLOC
- KEY 0
- KEYPHASOR
- M2
- OnePM
- PROWLER
- PROXIMITOR
- PROXPAC
- RANGER
- SEISMOPROBE
- SCOUT
- SYSTEM 1
- TRENDMASTER
- TURNINGPOINT
- VANTAGEPOINT
- VB SERIES
- VBONLINE
- VELOMITOR
- VITALYX
- VORSO
All product and company names are trademarks of their respective holders. Use of the trademarks does not imply any affiliation with or endorsement by the respective holders.
BENTLY NEVADA PATENT INFORMATION
The following is a list of current patents held by Bently Nevada, a Baker Hughes business. The list below shows the country code where the patent resides, the issued patent number, and the title of the patent.
Patent Reference Title
| 155504-US-1 | A NON-CONTACT CAPACITIVE SENSOR AND CABLE WITH DUAL LAYER ACTIVE SHIELD |
| 145764-US-1 | METHOD AND SYSTEM FOR DETECTING AND REDUCING DRAFT TUBE PRESSURE FLUCTUATIONS |
| 145770-US-1 | SYSTEM AND METHOD FOR DETERMINING AN ANGULAR POSITION OF A ROTOR AND A RADIAL POSITION OF THE ROTOR |
| 143244-US-5 | Capacitive sensor for non-contacting gap and dielectric medium measurement |
| 148102-US-1 | METHOD AND APPARATUS FOR AUTOMATED MANUFACTURE OF A PROBE TIP |
| 269094-NZ-1 | Improvements in or relating to vibration analysis |
| 186140-US-1 | CABLE SEALS AND METHODS OF ASSEMBLY |
| 193450-US-1 | METHODS AND SYSTEMS FOR CONTROLLING THE TEMPERATURE STABILITY OF AN INDUCTOR |
| 143244-US-1 | Capacitive sensor and method for non-contacting gap and dielectric medium measurement |
| 148480-US-1 | METHOD AND APPARATUS FOR ATTACHMENT OF A PLASTIC PROBE TIP TO A METAL COMPONENT |
| 156581-US-1 | METHODS AND APPARATUS FOR SENSING PRESSURE |
| 198313-US-1 | Metal Particle Sensor System |
| 269123-US-1 | Vibration data collection method and apparatus |
| 150585-US-1 | HIGH-TEMPERATURE PIEZOELECTRIC VIBRATION SENSOR ASSEMBLY |
| 214761-US-1 | Feedback circuit for radiation resistant transducer |
| 141903-GB-3 | Cylinder pressure transducer and related method |
| 141902-US-1 | SYSTEM, METHOD, AND ARTICLE OF MANUFACTURE FOR OBTAINING DATA |
| 184882-US-1 | METHOD AND SYSTEM FOR MONITORING A PISTON ROD |
| 128596-US-2 | METHOD AND SYSTEM FOR MULTI-FREQUENCY INDUCTIVE RATIO MEASUREMENT |
| 269100-NZ-1 | Method and system for vibration sensing power management |
| 189901-US-1 | Stepless Unloaders -- Detecting Suction Valve Closure |
| 148469-US-1 | METHOD AND APPARATUS FOR MACHINE STATE QUANTIFICATION IN MACHINERY MANAGEMENT SYSTEMS |
| 148480-US-2 | METHOD AND APPARATUS FOR ATTACHMENT OF A PLASTIC PROBE TIP TO A METAL COMPONENT |
| 165095-US-1 | METHOD AND SYSTEM FOR PERFORMING MODEL-BASED MULTI-OBJECTIVE ASSET OPTIMIZATION AND DECISION-MAKING |
| 156581-US-5 | METHODS AND APPARATUS FOR SENSING PRESSURE |
| 148102-US-2 | METHOD AND APPARATUS FOR AUTOMATED MANUFACTURE OF A PROBE TIP |
| 232352-US-1 | USB VIBRATION DATA ACQUISITION |
| 136239-US-1 | Methods and systems for monitoring and diagnosing machinery by incremently testing a rule |
| 226894-NZ-3 | PROCESS DATA TRANSMITTER WITH WIRELESS CAPABILITY |
| 269094-US-3 | Vibration analysis |
| 187878-US-1 | METHODS AND APPARATUS FOR MONITORING ROTARY MACHINES |
| 230846-US-1 | ROTOR/STATOR RELATIVE POSITION DETERMINING METHOD AND APPARATUS |
| 231230-US-1 | SYSTEM INCLUDING PHASE SIGNAL SAVING DURING ANOMALY AND RELATED METHOD |
| 231364-US-1 | ACCELEROMETER INCLUDING DIAPHRAGM AND POWER GENERATOR AND MOTOR INCLUDING SAME |
| 206604-US-1 | EDDY CURRENT INSPECTION DEVICE AND METHOD OF ASSEMBLY |
| 186140-US-2 | CABLE SEALS AND METHODS OF ASSEMBLY |
| 231232-US-1 | PHASE SIGNAL TRIGGERING HOLD OFF |
| 233706-US-1 | SYSTEM AND METHOD FOR MONITORING THE CONDITION OF A GEAR ASSEMBLY |
| 237073-US-1 | METHOD AND APPARATUS FOR ASSEMBLY OF CIRCUIT BOARDS |
| 225018-US-1 | ORIENTATION AWARE SENSOR |
| 214761-RU-6 | Feedback circuit for radiation resistant transducer |
| 232516-US-1 | ELECTRONIC STATOR END WINDING ACCELEROMETER SENSOR |
| 234911-US-1 | SELF ADJUSTING MULTI-EVENT TIMING APPARATUS |
| 161982-US-1 | CONFIGURABLE SYSTEM AND METHOD FOR POWER AND PROCESS PLANT MODELING |
| 229680-US-1 | SYSTEMS, METHODS, AND APPARATUS FOR RUB DETECTION IN A MACHINE |
| 269103-CA-1 | METHOD AND SYSTEM FOR VIBRATION SIGNAL PROCESSING |
| 238291-US-1 | SYSTEM, DEVICE AND METHOD FOR WIND TURBINE CONTROL BASED ON OPERATING PROFILES |
| 245396-US-1 | SIDEBAND ENERGY RATIO METHOD FOR GEAR MESH FAULT DETECTION |
| 231155-US-1 | MONITORING SYSTEM WITH DYNAMICALLY CONFIGURABLE NON-INTERFERING SIGNAL PROCESSING |
| 234982-US-1 | APPARATUS AND METHOD FOR DIRECT MEASUREMENT OF RECIPROCATING COMPRESSOR RIDER BAND WEAR |
| 269094-US-4 | Vibration Analysis |
| 231077-US-1 | PLUGGABLE BASES WITH DIFFERENT LEVELS OF REDUNDANCY |
| 241560-US-1 | SYSTEMS AND APPARATUS FOR HARVESTING ENERGY |
| 248378-US-1 | DEVICE, SYSTEM AND METHOD OF AN INTERFACE CONNECTOR |
| 234812-US-1 | DETECTION OF ANOMALOUS MOVEMENT IN A RECIPROCATING DEVICE |
| 229509-US-1 | SYSTEMS, METHODS, AND APPARATUS FOR MONITORING CLEARANCE IN A ROTARY MACHINE |
| 237656-US-1 | STALL AND SURGE DETECTION SYSTEM AND METHOD |
| 145770-KR-5 | SYSTEM AND METHOD FOR DETERMINING AN ANGULAR POSITION OF A ROTOR AND A RADIAL POSITION OF THE ROTOR |
| 265954-EM-3 | DISPLAY SCREEN WITH ANIMATED GRAPHICAL USER INTERFACE |
| 265956-EM-4 | DISPLAY SCREEN WITH GRAPHICAL USER INTERFACE |
| 243478-US-1 | MONITORING SYSTEM AND DISPLAY FOR USE IN A MONITORING SYSTEM |
| 244150-US-1 | BLADE MONITORING SYSTEM |
| 241580-US-1 | MONITORING SYSTEMS AND BACKPLANE FOR A MONITORING SYSTEM |
| 246496-US-1 | SYSTEMS AND METHODS FOR USE IN MONITORING OPERATION OF A ROTATING COMPONENT |
| 269094-CA-2 | IMPROVEMENTS IN OR RELATING TO VIBRATION ANALYSIS |
| 248969-US-1 | A METHOD OF UTILIZING DUAL COMPARATORS TO FACILITATE A PRECISION SIGNAL RECTIFICATION AND TIMING SYSTEM WITHOUT SIGNAL FEEDBACK |
| 249698-US-1 | CABLE SYSTEM AND METHODS OF ASSEMBLING A CABLE SYSTEM |
| 246162-US-1 | SENSOR ASSEMBLY AND METHODS OF MEASURING A PROXIMITY OF A MACHINE COMPONENT TO A SENSOR |
| 214761-KR-5 | Feedback circuit for radiation resistant transducer |
| 155504-GB-4 | use of multiple combed active guard layers and the use of foil on the coaxial layer of the cable used to connect the probe to the sensor electronics |
| 247779-GB-8 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL |
| 247779-DE-9 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL |
| 242300-US-1 | METHODS AND SYSTEMS FOR ISOLATING A FREQUENCY IN A ROTATING MACHINE |
| 247777-DE-8 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL DEPENDENT ON SPEED |
| 247777-DK-9 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL DEPENDENT ON SPEED |
| 246037-US-1 | SENSOR ASSEMBLY AND METHODS OF ADJUSTING THE OPERATION OF A SENSOR |
| 252418-US-1 | GAS TURBINE SEQUENCING METHOD AND SYSTEM |
| 232516-CA-2 | ELECTRONIC STATOR END WINDING ACCELEROMETER SENSOR |
| 225010-US-1 | SYSTEMS AND METHODS FOR USE IN PROVIDING A SENSOR SIGNAL INDEPENDENT OF GROUND |
| 242447-US-1 | SYSTEM AND METHOD FOR DETERMINING THE LOCATION OF WIRELESS SENSORS |
| 247129-US-1 | MONITORING SYSTEM AND METHODS FOR MONITORING MACHINES WITH SAME |
| 248996-US-1 | SYSTEM AND METHOD FOR MONITORING ROTATING DEVICE |
| 263556-US-1 | SIGNAL INTERFACE SYSTEM AND METHOD |
| 247779-US-1 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL |
| 243874-US-1 | MULTI PLATE BOARD EMBEDDED CAPACITOR AND METHODS FOR FABRICATING THE SAME |
| 250323-US-1 | COMMUNICATION SYSTEM FOR USE IN HAZARDOUS ENVIRONMENTS |
| 252794-US-1 | SENSOR AND INSPECTION SYSTEM DEPLOYING AN OPTICAL CONDUIT |
| 252094-US-1 | METHOD FOR REDUCING POWER CONSUMPTION IN NODE DEVICES OF A CONDITION MONITORING SYSTEM |
| 248043-US-1 | COMPUTING DEVICE AND METHODS OF PRESENTING DATA TO IDENTIFY FAULTS WITHIN POWER SYSTEMS |
| 244402-US-1 | Evergreen 3300 Plus Chassis Design |
| 247834-US-1 | METHOD AND SYSTEM FOR DETECTION OF MACHINE OPERATION STATE FOR MONITORING PURPOSES |
| 229666-US-1 | METHODS AND SYSTEMS FOR MONITORING STATOR WINDING VIBRATION |
| 243533-US-1 | RECIPROCATING COMPRESSOR AND METHODS FOR MONITORING OPERATION OF SAME |
| 265954-US-1 | DISPLAY SCREEN WITH ANIMATED GRAPHICAL USER INTERFACE |
| 255454-US-1 | SYSTEMS AND METHODS FOR MACHINE CONFIGURATION |
| 253168-US-1 | PROXIMITY SENSOR ASSEMBLY AND INSPECTION SYSTEM |
| 250586-US-1 | TWO-WAY, SECURE, DATA COMMUNICATION WITHIN CRITICAL INFRASTRUCTURES |
| 247777-US-1 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL DEPENDENT ON SPEED |
| 248378-DK-4 | DEVICE, SYSTEM AND METHOD OF AN INTERFACE CONNECTOR |
| 250873-US-1 | MECHANICAL FORCE COMPONENTS SENSING SYSTEM AND AN ASSOCIATED METHOD THEREOF FOR A MAGNETICALLY ENCODED DEVICE |
| 245716-US-1 | SENSOR ASSEMBLY AND METHOD OF MEASURING THE PROXIMITY OF A MACHINE COMPONENT TO A SENSOR |
| 237073-US-2 | METHOD OF ASSEMBLING A CIRCUIT BOARD ASSEMBLY |
| 264938-US-1 | METHOD AND SYSTEM FOR USE IN FACILITATING PATCH CHANGE MANAGEMENT OF INDUSTRIAL CONTROL SYSTEMS |
| 248228-US-1 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 259605-US-1 | TUNABLE VIBRATION ENERGY HARVESTER AND METHOD |
| 251938-US-1 | SYSTEM AND METHOD FOR EQUIPMENT MONITORING COMPONENT CONFIGURATION |
| 229680-US-2 | SYSTEMS, METHODS, AND APPARATUS FOR RUB DETECTION IN A MACHINE |
| 265956-US-1 | DISPLAY SCREEN WITH ANIMATED GRAPHICAL USER INTERFACE |
| 250832-US-1 | SYSTEMS AND METHODS FOR SYNCHRONOUS ZOOMING |
| 244411-US-1 | CONVERSION SYSTEM AND METHOD FOR USE IN UPGRADING A MONITORING SYSTEM |
| 259799-US-1 | SYSTEM AND METHOD FOR DETERMINING POLE SHIFT |
| 186140-US-3 | CABLE SEALS AND METHODS OF ASSEMBLY |
| 277852-EM-2 | VIBRATION RECORDING DEVICE |
| 264470-US-1 | AUTOMATIC BIPOLAR SIGNAL SWITCHING |
| 261557-US-1 | CHANGE DETECTION SYSTEM USING FREQUENCY ANALYSIS AND METHOD |
| 253715-US-1 | METHOD AND SYSTEM FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 247777-AU-2 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL DEPENDENT ON SPEED |
| 234812-US-2 | DETECTION OF ANOMALOUS MOVEMENT IN A RECIPROCATING DEVICE |
| 241625-US-1 | MULTIVALUE BAR GRAPH DISPLAYS AND METHODS OF IMPLEMENTING SAME |
| 247746-US-1 | SENSORS FOR HIGH-TEMPERATURE ENVIRONMENTS AND METHOD FOR ASSEMBLING SAME |
| 259463-US-1 | ACCOMMODATION OF DIFFERENT TYPE OF SENSORS IN VIBRATION MONITORING SYSTEM USING EXTERNAL INPUT OR DAUGHTER BOARD WITH INTERCHANGEABLE OPERATING HARDWARE |
| 256683-US-1 | MODULE FOR USE WITH A MONITORING SYSTEM AND METHOD OF ASSEMBLING SAME |
| 243874-AU-2 | MULTI PLATE BOARD EMBEDDED CAPACITOR AND METHODS FOR FABRICATING THE SAME |
| 261669-US-1 | PROXIMITY AND STRAIN SENSING |
| 247779-AU-2 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL |
| 279098-EM-3 | GRAPHICAL USER INTERFACE FOR DISPLAY SCREEN OR PORTION THEREOF |
| 279098-EM-2 | GRAPHICAL USER INTERFACE FOR DISPLAY SCREEN OR PORTION THEREOF |
| 270607-US-1 | SYSTEMS AND METHODS FOR MONITORING ROTARY EQUIPMENT |
| 262098-US-1 | METHOD AND SYSTEM FOR PLOTTING A DISTRIBUTION OF DATA |
| 143244-GB-7 | A capacitive sensor and method for non-contacting gap and dielectric medium measurement |
| 143244-DE-6 | A capacitive sensor and method for non-contacting gap and dielectric medium measurement |
| 143244-IT-8 | A capacitive sensor and method for non-contacting gap and dielectric medium measurement |
| 242447-US-2 | SYSTEM AND METHOD FOR DETERMINING THE LOCATION OF WIRELESS SENSORS |
| 261670-US-1 | NONCONTACT MAGNETOSTRICTIVE SENSING SYSTEMS AND METHODS |
| 259390-US-1 | CAMPBELL DIAGRAM DISPLAYS AND METHODS AND SYSTEMS FOR IMPLEMENTING SAME |
| 262099-US-1 | METHOD AND SYSTEM FOR PLOTTING DATA |
| 268213-US-2 | BALANCE OF PLANT ONLINE RACK AND MODULE ASSEMBLY |
| 277852-US-1 | VIBRATION RECORDING DEVICE |
| 248228-US-5 | Plant 3D Spatial Navigation |
| 268213A-US-2 | BALANCE OF PLANT ONLINE MODULE |
| 264009-US-1 | Integrate Circuit for Keyphasor Conditioning |
| 244402-DK-6 | MONITORING SYSTEM FOR USE IN MONITORING THE OPERATION OF MACHINERY AND METHOD OF RETROFITTING MONITORING SYSTEM |
| 244402-DE-7 | MONITORING SYSTEM FOR USE IN MONITORING THE OPERATION OF MACHINERY AND METHOD OF RETROFITTING MONITORING SYSTEM |
| 267492-US-1 | SYSTEMS AND METHODS FOR CALIBRATING PHASE AND SENSITIVITY OF CURRENT TRANSDUCERS |
| 270394-US-1 | SYSTEMS AND METHODS FOR DYNAMICALLY CONTROLLING CONTENT DISPLAYED ON A CONDITION MONITORING SYSTEM |
| 273842-US-1 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 273320-US-1 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 248424-DK-4 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 264982-DE-5 | PROTECTION MONITORING SYSTEM WITH FAULT INDICATORS |
| 264982-DK-6 | PROTECTION MONITORING SYSTEM WITH FAULT INDICATORS |
| 264982-SE-7 | PROTECTION MONITORING SYSTEM WITH FAULT INDICATORS |
| 248969-DK-4 | A METHOD OF UTILIZING DUAL COMPARATORS TO FACILITATE A PRECISION SIGNAL RECTIFICATION AND TIMING SYSTEM WITHOUT SIGNAL FEEDBACK |
| 251434-US-1 | CONDITION MONITORING SYSTEM AND METHOD |
| 269149-US-1 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF A COMPRESSOR |
| 264507-US-1 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 264654-US-1 | SYSTEM AND METHOD FOR A CAPACITIVE VOLTAGE SENSOR SYSTEM |
| 187878-DE-5 | METHODS AND APPARATUS FOR MONITORING ROTARY MACHINES |
| 225010-DK-4 | SYSTEMS AND METHODS FOR USE IN PROVIDING A SENSOR SIGNAL INDEPENDENT OF GROUND |
| 271589-US-1 | SYSTEM AND METHOD FOR VERIFYING THE CONFIGURATION AND INSTALLATION OF A MONITORING AND PROTECTION SYSTEM |
| 278251-US-2 | SYSTEM AND METHOD FOR TORQUE TRANSDUCER AND TEMPERATURE SENSOR |
| 252418-CN-3 | GAS TURBINE SEQUENCING METHOD AND SYSTEM |
| 273098-US-1 | SUBSEA SENSOR ASSEMBLIES |
| 189901-IN-4 | Stepless Unloaders -- Detecting Suction Valve Closure |
| 264508-US-1 | METHODS AND APPARATUS FOR DEFINING A PROBE CONFIGURATION USING A PROBE CONFIGURATION TOOL |
| 273842-US-3 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 273096-US-1 | SUBSEA SENSOR ASSEMBLIES |
| 247746-CH-2 | SENSORS FOR HIGH-TEMPERATURE ENVIRONMENTS AND METHOD FOR ASSEMBLING SAME |
| 273097-US-1 | SUBSEA SENSOR ASSEMBLIES |
| 262049A-US-1 | METHODS AND SYSTEMS FOR INTEGRATED PLOT TRAINING |
| 265314-CH-6 | SECURE SYSTEMS AND METHODS FOR MACHINE MONITORING |
| 265314-DE-7 | SECURE SYSTEMS AND METHODS FOR MACHINE MONITORING |
| 265314-DK-8 | SECURE SYSTEMS AND METHODS FOR MACHINE MONITORING |
| 263230-US-1 | FAULT FREQUENCY SET DETECTION SYSTEM AND METHOD |
| 318782-EM-2 | GRAPHICAL OBJECT |
| 279098-US-1 | GRAPHICAL USER INTERFACE FOR DISPLAY SCREEN OR PORTION THEREOF |
| 273278-US-1 | SYNCHRONIZED ZOOMING ACROSS MULTIPLE PLOTS |
| 231230-CH-5 | SYSTEM INCLUDING PHASE SIGNAL SAVING DURING ANOMALY AND RELATED METHOD |
| 231230-DE-6 | SYSTEM INCLUDING PHASE SIGNAL SAVING DURING ANOMALY AND RELATED METHOD |
| 214761-IN-3 | Feedback circuit for radiation resistant transducer |
| 249616-CH-2 | SENSOR ASSEMBLY FOR ROTATING DEVICES AND METHODS FOR FABRICATING |
| 230846-CA-2 | ROTOR/STATOR RELATIVE POSITION DETERMINING METHOD AND APPARATUS |
| 264809-US-1 | SYSTEM AND METHOD FOR PRESENTING INFORMATION IN AN INDUSTRIAL MONITORING SYSTEM |
| 264982-US-1 | PROTECTION MONITORING SYSTEM WITH FAULT INDICATORS |
| 261669-SE-10 | PROXIMITY AND STRAIN SENSING |
| 261669-CH-11 | PROXIMITY AND STRAIN SENSING |
| 261669-DE-8 | PROXIMITY AND STRAIN SENSING |
| 261669-DK-9 | PROXIMITY AND STRAIN SENSING |
| 264982-JP-4 | PROTECTION MONITORING SYSTEM WITH FAULT INDICATORS |
| 321188-EM-3 | GRAPHICAL OBJECT |
| 321188-EM-4 | Graphical Object |
| 249616-US-1 | SENSOR ASSEMBLY FOR ROTATING DEVICES AND METHODS FOR FABRICATING |
| 257764-US-1 | METHOD SYSTEM AND DEVICE FOR MONITORING OPERATIONS OF A SYSTEM ASSET |
| 321188-CH-2 | GRAPHICAL OBJECT |
| 247779-CA-3 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL |
| 247777-CA-3 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL DEPENDENT ON SPEED |
| 273096-US-4 | SUBSEA SENSOR ASSEMBLIES |
| 278251-US-4 | SYSTEM AND METHOD FOR TORQUE TRANSDUCER AND TEMPERATURE SENSOR |
| 275689-US-1 | PROXIMITY PROBE INTERCHANGE COMPENSATION |
| 273320A-US-1 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 277900-DK-3 | ANALYZING MACHINERY OPERATING PARAMETERS |
| 277900-DE-4 | ANALYZING MACHINERY OPERATING PARAMETERS |
| 277900-SE-5 | ANALYZING MACHINERY OPERATING PARAMETERS |
| 277900-GB-6 | ANALYZING MACHINERY OPERATING PARAMETERS |
| 189901-DE-3 | Stepless Unloaders -- Detecting Suction Valve Closure |
| 285501-US-2 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF MACHINERY |
| 272829-US-1 | STRUCTURES MONITORING SYSTEM AND METHOD |
| 279700-US-1 | COLLECTION AND VALIDATION OF DATA FROM VISUAL DISPLAYS |
| 273842-US-5 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 318781-US-1 | Communicating Alarm Trigger Status |
| 285640-US-1 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 317126-US-1 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT METHODS AND SYSTEMS |
| 324066-DE-2 | USER INTERFACE FOR ROD POSITION PLOT PRESENTATION |
| 242300-DE-6 | METHODS AND SYSTEMS FOR ISOLATING A FREQUENCY IN A ROTATING MACHINE |
| 242300-SE-7 | METHODS AND SYSTEMS FOR ISOLATING A FREQUENCY IN A ROTATING MACHINE |
| 242300-CH-8 | METHODS AND SYSTEMS FOR ISOLATING A FREQUENCY IN A ROTATING MACHINE |
| 263240-US-1 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 270394-US-4 | SYSTEMS AND METHODS FOR DYNAMICALLY CONTROLLING CONTENT DISPLAYED ON A CONDITION MONITORING SYSTEM |
| 313511-US-1 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 248424-US-1 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 276314-US-1 | METHOD AND SYSTEM FOR AN INSTRUMENTED PISTON ASSEMBLY |
| 257764-US-6 | METHOD, SYSTEM, AND DEVICE FOR MONITORING OPERATIONS OF A SYSTEM ASSET |
| 273096-FR-6 | SUBSEA SENSOR ASSEMBLIES |
| 273096-DE-7 | SUBSEA SENSOR ASSEMBLIES |
| 273096-NO-10 | SUBSEA SENSOR ASSEMBLIES |
| 273096-GB-11 | SUBSEA SENSOR ASSEMBLIES |
| 263974A-US-1 | SYSTEM AND METHOD OF DETERMINING TOP-DEAD-CENTER (TDC) OF RECIPROCATING COMPRESSOR |
| 318796-US-1 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 319801-US-1 | TEMPERATURE COMPENSATED TORQUE SENSOR |
| 264507-US-4 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 278083-US-1 | NON-CONTACT MAGNETOSTRICTIVE SENSORS AND METHODS OF OPERATION OF SUCH SENSORS |
| 320861-US-1 | AUTOMATED ALARM SHELVING |
| 264982-US-8 | PROTECTION MONITORING SYSTEM WITH FAULT INDICATORS |
| 253791-EP-3 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 253791-DE-5 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 253791-DK-6 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 253791-SE-7 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 253791-CH-8 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 272877-US-1 | AUTOMATED DATA OVERLAY IN INDUSTRIAL MONITORING SYSTEMS |
| 273320A-US-3 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 326063-US-1 | ALARM NOTIFICATION DELAY |
| 243533-EP-4 | RECIPROCATING COMPRESSOR AND METHODS FOR MONITORING OPERATION OF SAME |
| 243533-DE-7 | RECIPROCATING COMPRESSOR AND METHODS FOR MONITORING OPERATION OF SAME |
| 243533-DK-8 | RECIPROCATING COMPRESSOR AND METHODS FOR MONITORING OPERATION OF SAME |
| 243533-SE-9 | RECIPROCATING COMPRESSOR AND METHODS FOR MONITORING OPERATION OF SAME |
| 243533-CH-10 | RECIPROCATING COMPRESSOR AND METHODS FOR MONITORING OPERATION OF SAME |
| 275918-US-1 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 247834-EP-3 | METHOD AND SYSTEM FOR DETECTION OF MACHINE OPERATION STATE FOR MONITORING PURPOSES |
| 247834-DE-6 | METHOD AND SYSTEM FOR DETECTION OF MACHINE OPERATION STATE FOR MONITORING PURPOSES |
| 247834-CH-7 | METHOD AND SYSTEM FOR DETECTION OF MACHINE OPERATION STATE FOR MONITORING PURPOSES |
| 247834-DK-8 | METHOD AND SYSTEM FOR DETECTION OF MACHINE OPERATION STATE FOR MONITORING PURPOSES |
| 247834-SE-9 | METHOD AND SYSTEM FOR DETECTION OF MACHINE OPERATION STATE FOR MONITORING PURPOSES |
| 317569-US-1 | METHODS AND SYSTEMS FOR NON-CONTACT MAGNETOSTRICTIVE SENSOR RUNOUT COMPENSATION |
| 319550-US-1 | GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 319801-CN-2 | Magnetostrictive Sensor |
| 248228-EP-2 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 248228-DE-6 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 248228-SE-7 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 248228-CH-8 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 316343-US-2 | EQUIPMENT MONITORING SYSTEMS AND DEVICES |
| 264388-US-1 | METHOD AND SYSTEM FOR USE IN DYNAMICALLY CONFIGURING DATA ACQUISITION SYSTEMS |
| 318614-US-1 | Non-Contact Magnetostrictive Stress Sensor with Gap Compensation Field |
| 243874-CA-3 | MULTI-PLATE BOARD-EMBEDDED CAPACITOR AND METHODS FOR FABRICATING THE SAME |
| 275689-US-2 | PROXIMITY PROBE INTERCHANGE COMPENSATION |
| 318093-US-1 | PRESSURE COMPENSATED SENSORS |
| 270420-US-1 | SYSTEMS AND METHODS FOR DYNAMICALLY GROUPING DATA ANALYSIS CONTENT |
| 263240-EP-3 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 263240-DK-6 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 263240-DE-7 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 263240-SE-8 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 263240-CH-9 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 263240-GB-10 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 318567-US-1 | NON-CONTACT MAGNETOSTRICTIVE SENSOR WITH GAP COMPENSATION FIELD |
| 270394-EP-3 | SYSTEMS AND METHODS FOR DYNAMICALLY CONTROLLING CONTENT DISPLAYED ON A CONDITION MONITORING SYSTEM |
| 270394-DK-6 | SYSTEMS AND METHODS FOR DYNAMICALLY CONTROLLING CONTENT DISPLAYED ON A CONDITION MONITORING SYSTEM |
| 270394-DE-7 | SYSTEMS AND METHODS FOR DYNAMICALLY CONTROLLING CONTENT DISPLAYED ON A CONDITION MONITORING SYSTEM |
| 270394-SE-8 | SYSTEMS AND METHODS FOR DYNAMICALLY CONTROLLING CONTENT DISPLAYED ON A CONDITION MONITORING SYSTEM |
| 270394-CH-9 | SYSTEMS AND METHODS FOR DYNAMICALLY CONTROLLING CONTENT DISPLAYED ON A CONDITION MONITORING SYSTEM |
| 252040-EP-5 | TURBOMACHINE BLADE MONITORING SYSTEM |
| 252040-DK-6 | TURBOMACHINE BLADE MONITORING SYSTEM |
| 252040-DE-7 | TURBOMACHINE BLADE MONITORING SYSTEM |
| 252040-SE-8 | TURBOMACHINE BLADE MONITORING SYSTEM |
| 252040-CH-9 | TURBOMACHINE BLADE MONITORING SYSTEM |
| 245396-EP-3 | SIDEBAND ENERGY RATIO METHOD FOR GEAR MESH FAULT DETECTION |
| 245396-DK-6 | SIDEBAND ENERGY RATIO METHOD FOR GEAR MESH FAULT DETECTION |
| 245396-DE-7 | SIDEBAND ENERGY RATIO METHOD FOR GEAR MESH FAULT DETECTION |
| 245396-SE-8 | SIDEBAND ENERGY RATIO METHOD FOR GEAR MESH FAULT DETECTION |
| 245396-CH-9 | SIDEBAND ENERGY RATIO METHOD FOR GEAR MESH FAULT DETECTION |
| 507689-EP-3 | Instrument Panel |
| 507641-EP-3 | Twisted Probe Cap |
| 507641-GB-4 | Twisted Probe Cap |
| 507689-EM-5 | Instrument Panel |
| 507689-EM-6 | Instrument Panel |
| 507689-EM-7 | Instrument Panel |
| 507689-EM-8 | Instrument Panel |
| 273320-EP-3 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 273320-DE-4 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 273320-SE-5 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 273320-CH-6 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 507689-EM-4 | Instrument Panel |
| 318781-US-3 | COMMUNICATING ALARM TRIGGER STATUS |
| 321188-US-1 | DISPLAY SCREEN WITH A GRAPHICAL USER INTERFACE |
| 316343-US-5 | EQUIPMENT MONITORING SYSTEMS AND DEVICES |
| 263240-US-4 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA SAMPLING RATE |
| 273842-US-6 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 325047-US-1 | INTEGRATION OF DIAGNOSTIC INSTRUMENTATION WITH MACHINE PROTECTION SYSTEM |
| 313511-US-3 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 507688-EP-3 | Card Module |
| 507688-GB-4 | Card Module |
| 318784-US-1 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 507829-US-1 | Monitoring Multiple Industrial Machines |
| 319550-US-5 | GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 318724-US-1 | Integration of Proximity Sensors With Magnetostrictive Torque Sensors |
| 273096-US-5 | SUBSEA SENSOR ASSEMBLIES |
| 501653-US-1 | JUST-IN-TIME DATA PROVISION BASED ON PREDICTED CACHE POLICIES |
| 273320A-EP-2 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 273320A-DK-4 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 273320A-DE-5 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 273320A-SE-6 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 273320A-CH-7 | SYSTEM AND METHOD OF MAGNETIC SHIELDING FOR SENSORS |
| 264508-EP-3 | METHODS AND APPARATUS FOR DEFINING A PROBE CONFIGURATION USING A PROBE CONFIGURATION TOOL |
| 264508-DK-5 | METHODS AND APPARATUS FOR DEFINING A PROBE CONFIGURATION USING A PROBE CONFIGURATION TOOL |
| 264508-DE-6 | METHODS AND APPARATUS FOR DEFINING A PROBE CONFIGURATION USING A PROBE CONFIGURATION TOOL |
| 264508-SE-7 | METHODS AND APPARATUS FOR DEFINING A PROBE CONFIGURATION USING A PROBE CONFIGURATION TOOL |
| 264508-CH-8 | METHODS AND APPARATUS FOR DEFINING A PROBE CONFIGURATION USING A PROBE CONFIGURATION TOOL |
| 269149-EP-3 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF A COMPRESSOR |
| 269149-DK-4 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF A COMPRESSOR |
| 269149-DE-5 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF A COMPRESSOR |
| 269149-SE-6 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF A COMPRESSOR |
| 269149-CH-7 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF A COMPRESSOR |
| 320861-US-3 | AUTOMATED ALARM SHELVING |
| 320171-US-2 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |
| 277900-US-1 | ANALYZING MACHINERY OPERATING PARAMETERS |
| 318796-US-3 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 264507-US-5 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 507688-CN-2 | Card Module |
| 507689-CN-2 | Instrument Panel |
| 312820-US-3 | CALIBRATION APPARATUS, CALIBRATION METHOD, AND MEASURING SYSTEM |
| 507641-CN-2 | Twisted Probe Cap |
| 263974A-EP-2 | SYSTEM AND METHOD OF DETERMINING TOP-DEAD-CENTER TDC OF RECIPROCATING COMPRESSOR |
| 263974A-DK-3 | SYSTEM AND METHOD OF DETERMINING TOP-DEAD-CENTER TDC OF RECIPROCATING COMPRESSOR |
| 263974A-DE-4 | SYSTEM AND METHOD OF DETERMINING TOP-DEAD-CENTER TDC OF RECIPROCATING COMPRESSOR |
| 263974A-SE-5 | SYSTEM AND METHOD OF DETERMINING TOP-DEAD-CENTER TDC OF RECIPROCATING COMPRESSOR |
| 263974A-CH-6 | SYSTEM AND METHOD OF DETERMINING TOP-DEAD-CENTER TDC OF RECIPROCATING COMPRESSOR |
| 263974A-GB-7 | SYSTEM AND METHOD OF DETERMINING TOP-DEAD-CENTER TDC OF RECIPROCATING COMPRESSOR |
| 251434-EP-3 | CONDITION MONITORING SYSTEM AND METHOD |
| 251434-DK-5 | CONDITION MONITORING SYSTEM AND METHOD |
| 251434-DE-6 | CONDITION MONITORING SYSTEM AND METHOD |
| 251434-SE-7 | CONDITION MONITORING SYSTEM AND METHOD |
| 251434-CH-8 | CONDITION MONITORING SYSTEM AND METHOD |
| 251434-GB-9 | CONDITION MONITORING SYSTEM AND METHOD |
| 314027-US-2 | SYSTEMS AND METHODS FOR PRIORITIZING AND MONITORING DEVICE STATUS IN A CONDITION MONITORING SOFTWARE APPLICATION |
| 324948-US-2 | GENERATING NATURAL LANGUAGE RECOMMENDATIONS BASED ON AN INDUSTRIAL LANGUAGE MODEL |
| 279700-US-3 | COLLECTION AND VALIDATION OF DATA FROM VISUAL DISPLAYS |
| 323746-US-2 | ANALYTICS ENGINE |
| 320961-US-1 | EVENT LIST MANAGEMENT SYSTEM |
| 275880-US-1 | DETECTING ROTOR ANOMALIES DURING TRANSIENT SPEED OPERATIONS |
| 273842-EP-4 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 273842-DK-7 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 273842-DE-8 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 273842-SE-9 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 273842-CH-10 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 273842-GB-11 | SYSTEMS AND METHODS FOR MONITORING PROTECTION DEVICES OF AN INDUSTRIAL MACHINE |
| 324066-US-1 | DISPLAY SCREEN OR PORTION THEREOF WITH GRAPHICAL USER INTERFACE |
| 325017-US-1 | MONITORING SYSTEM WITH BRIDGES FOR INTERCONNECTING SYSTEM ELEMENTS |
| 324947-US-1 | FLEXIBLE CONDITION MONITORING OF INDUSTRIAL MACHINES |
| 326064-US-1 | SYSTEMS AND METHODS FOR DYNAMICALLY GROUPING DATA ANALYSIS CONTENT |
| 285501-EP-3 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF MACHINERY |
| 285501-DK-4 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF MACHINERY |
| 285501-DE-5 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF MACHINERY |
| 285501-SE-6 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF MACHINERY |
| 285501-CH-7 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF MACHINERY |
| 285501-GB-8 | SYSTEMS AND METHODS FOR DETERMINING MECHANICAL STRESS OF MACHINERY |
| 318796-EP-2 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318796-DK-5 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318796-DE-6 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318796-SE-7 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318796-CH-8 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318796-GB-9 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 312820-EP-2 | CALIBRATION APPARATUS, CALIBRATION METHOD, AND MEASURING SYSTEM |
| 312820-DK-4 | CALIBRATION APPARATUS, CALIBRATION METHOD, AND MEASURING SYSTEM |
| 312820-DE-5 | CALIBRATION APPARATUS, CALIBRATION METHOD, AND MEASURING SYSTEM |
| 312820-SE-6 | CALIBRATION APPARATUS, CALIBRATION METHOD, AND MEASURING SYSTEM |
| 312820-CH-7 | CALIBRATION APPARATUS, CALIBRATION METHOD, AND MEASURING SYSTEM |
| 312820-GB-8 | CALIBRATION APPARATUS, CALIBRATION METHOD, AND MEASURING SYSTEM |
| 275918-US-3 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 325257-US-1 | GATED ASYNCHRONOUS MULTIPOINT NETWORK INTERFACE MONITORING SYSTEM |
| 257764-US-7 | METHOD, SYSTEM, AND DEVICE FOR MONITORING OPERATIONS OF A SYSTEM ASSET |
| 324904-US-1 | MONITORING SYSTEMS FOR INDUSTRIAL MACHINES HAVING DYNAMICALLY ADJUSTABLE COMPUTATIONAL UNITS |
| 318442-US-1 | PRESSURE COMPENSATED SENSORS |
| 318796-US-4 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 265314-US-1 | SECURE SYSTEMS AND METHODS FOR MACHINE MONITORING |
| 502757-US-1 | Field Calibration for Torsional Vibration Sensor |
| 319801-US-5 | TEMPERATURE COMPENSATED TORQUE SENSOR |
| 313511-EP-2 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 313511-DK-5 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 313511-DE-6 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 313511-SE-7 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 313511-CH-8 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 313511-GB-9 | SYSTEM AND METHOD FOR MEASURING TORQUE ON A ROTATING COMPONENT |
| 323134-US-1 | TWO-STEP HARDWARE AUTHENTICATION |
| 319550-EP-3 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 319550-DK-6 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 319550-DE-7 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 319550-SE-8 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 319550-CH-9 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 319550-GB-10 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 261670-EP-3 | NON-CONTACT MAGNETOSTRICTIVE SENSING SYSTEMS AND METHODS |
| 261670-DK-4 | NON-CONTACT MAGNETOSTRICTIVE SENSING SYSTEMS AND METHODS |
| 261670-DE-5 | NON-CONTACT MAGNETOSTRICTIVE SENSING SYSTEMS AND METHODS |
| 261670-SE-6 | NON-CONTACT MAGNETOSTRICTIVE SENSING SYSTEMS AND METHODS |
| 261670-CH-7 | NON-CONTACT MAGNETOSTRICTIVE SENSING SYSTEMS AND METHODS |
| 261670-GB-8 | NON-CONTACT MAGNETOSTRICTIVE SENSING SYSTEMS AND METHODS |
| 507641-US-1 | Twisted Probe Cap |
| 285640-US-3 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 325069-US-1 | MONITORING SYSTEM WITH MULTIDROP BACKPLANE SCHEDULER |
| 263240-US-5 | METHODS AND SYSTEMS FOR ONLINE MONITORING USING A VARIABLE DATA |
| 324730-US-1 | FLEXIBLE AND SCALABLE MONITORING SYSTEMS FOR INDUSTRIAL MACHINES |
| 323662-US-4 | PROXIMITY SENSING SYSTEM WITH COMPONENT COMPATIBILITY TESTING |
| 318614-EP-2 | NON-CONTACT MAGNETOSTRICTIVE STRESS SENSOR WITH GAP COMPENSATION |
| 318614-DK-4 | NON-CONTACT MAGNETOSTRICTIVE STRESS SENSOR WITH GAP COMPENSATION |
| 318614-DE-5 | NON-CONTACT MAGNETOSTRICTIVE STRESS SENSOR WITH GAP COMPENSATION |
| 318614-SE-6 | NON-CONTACT MAGNETOSTRICTIVE STRESS SENSOR WITH GAP COMPENSATION |
| 318614-CH-7 | NON-CONTACT MAGNETOSTRICTIVE STRESS SENSOR WITH GAP COMPENSATION |
| 318614-GB-8 | NON-CONTACT MAGNETOSTRICTIVE STRESS SENSOR WITH GAP COMPENSATION |
| 324066-US-4 | DISPLAY SCREEN OR PORTION THEREOF WITH GRAPHICAL USER INTERFACE |
| 327249-US-1 | CONSISTENT PORTABLE SENSOR PLACEMENT |
| 273278-EP-3 | SYNCHRONIZED ZOOMING ACROSS MULTIPLE PLOTS |
| 273278-DK-5 | SYNCHRONIZED ZOOMING ACROSS MULTIPLE PLOTS |
| 273278-DE-6 | SYNCHRONIZED ZOOMING ACROSS MULTIPLE PLOTS |
| 273278-SE-7 | SYNCHRONIZED ZOOMING ACROSS MULTIPLE PLOTS |
| 273278-CH-8 | SYNCHRONIZED ZOOMING ACROSS MULTIPLE PLOTS |
| 273278-GB-9 | SYNCHRONIZED ZOOMING ACROSS MULTIPLE PLOTS |
| 313511-US-4 | SYSTEM AND METHOD FOR MEASURING ELECTROMAGNETIC CHARACTERISTIC ON A COMPONENT |
| 317569-CN-3 | METHODS AND SYSTEMS FOR NON-CONTACT MAGNETOSTRICTIVE SENSOR RUNOUT COMPENSATION |
| 320861-EP-2 | AUTOMATED ALARM SHELVING |
| 320861-DK-4 | AUTOMATED ALARM SHELVING |
| 320861-DE-5 | AUTOMATED ALARM SHELVING |
| 320861-SE-6 | AUTOMATED ALARM SHELVING |
| 320861-CH-7 | AUTOMATED ALARM SHELVING |
| 320861-GB-8 | AUTOMATED ALARM SHELVING |
| 317109-US-2 | GEARBOX MONITORING |
| 324870-US-2 | ANOMALY DETECTION |
| 285640-EP-2 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 285640-DK-4 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 285640-DE-5 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 285640-SE-6 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 285640-CH-7 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 285640-GB-8 | SYSTEMS AND METHODS FOR COMPENSATING FOR AIR GAP SENSITIVITY IN TORQUE SENSORS |
| 271589-EP-3 | SYSTEM AND METHOD FOR VERIFYING THE CONFIGURATION AND INSTALLATION OF A MONITORING AND PROTECTION SYSTEM |
| 271589-DK-4 | SYSTEM AND METHOD FOR VERIFYING THE CONFIGURATION AND INSTALLATION OF A MONITORING AND PROTECTION SYSTEM |
| 271589-DE-5 | SYSTEM AND METHOD FOR VERIFYING THE CONFIGURATION AND INSTALLATION OF A MONITORING AND PROTECTION SYSTEM |
| 271589-SE-6 | SYSTEM AND METHOD FOR VERIFYING THE CONFIGURATION AND INSTALLATION OF A MONITORING AND PROTECTION SYSTEM |
| 271589-CH-7 | SYSTEM AND METHOD FOR VERIFYING THE CONFIGURATION AND INSTALLATION OF A MONITORING AND PROTECTION SYSTEM |
| 271589-GB-8 | SYSTEM AND METHOD FOR VERIFYING THE CONFIGURATION AND INSTALLATION OF A MONITORING AND PROTECTION SYSTEM |
| 324870-RU-8 | ANOMALY DETECTION |
| 259390-EP-3 | CAMPBELL DIAGRAM DISPLAYS AND METHODS AND SYSTEMS FOR IMPLEMENTING SAME |
| 259390-DK-5 | CAMPBELL DIAGRAM DISPLAYS AND METHODS AND SYSTEMS FOR IMPLEMENTING SAME |
| 259390-DE-6 | CAMPBELL DIAGRAM DISPLAYS AND METHODS AND SYSTEMS FOR IMPLEMENTING SAME |
| 259390-SE-7 | CAMPBELL DIAGRAM DISPLAYS AND METHODS AND SYSTEMS FOR IMPLEMENTING SAME |
| 259390-CH-8 | CAMPBELL DIAGRAM DISPLAYS AND METHODS AND SYSTEMS FOR IMPLEMENTING SAME |
| 259390-GB-9 | CAMPBELL DIAGRAM DISPLAYS AND METHODS AND SYSTEMS FOR IMPLEMENTING SAME |
| 501653-US-3 | JUST-IN-TIME DATA PROVISION BASED ON PREDICTED CACHE POLICIES |
| 325047-JP-5 | INTEGRATION OF DIAGNOSTIC INSTRUMENTATION WITH MACHINE PROTECTION SYSTEM |
| 325113-US-1 | Ensuring correct portable sensor placement |
| 324730-JP-5 | FLEXIBLE AND SCALABLE MONITORING SYSTEMS FOR INDUSTRIAL MACHINES |
| 317126-EP-3 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT METHODS AND SYSTEMS |
| 317126-DK-4 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT METHODS AND SYSTEMS |
| 317126-DE-5 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT METHODS AND SYSTEMS |
| 317126-SE-6 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT METHODS AND SYSTEMS |
| 317126-CH-7 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT METHODS AND SYSTEMS |
| 317126-GB-8 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT METHODS AND SYSTEMS |
| 323662-CN-2 | PROXIMITY SENSING SYSTEM WITH COMPONENT COMPATIBILITY TESTING |
| 317109-CN-4 | CALCULATING KINEMATICS PROPERTIES OF GEARBOXES USING GENERIC MODELS |
| 277851-EP-2 | SYSTEMS AND METHODS FOR PROVIDING QUALITATIVE INDICATION OF VIBRATION SEVERITY WHILE RECORDING |
| 277851-DK-3 | SYSTEMS AND METHODS FOR PROVIDING QUALITATIVE INDICATION OF VIBRATION SEVERITY WHILE RECORDING |
| 277851-DE-4 | SYSTEMS AND METHODS FOR PROVIDING QUALITATIVE INDICATION OF VIBRATION SEVERITY WHILE RECORDING |
| 277851-SE-5 | SYSTEMS AND METHODS FOR PROVIDING QUALITATIVE INDICATION OF VIBRATION SEVERITY WHILE RECORDING |
| 277851-CH-6 | SYSTEMS AND METHODS FOR PROVIDING QUALITATIVE INDICATION OF VIBRATION SEVERITY WHILE RECORDING |
| 277851-GB-7 | SYSTEMS AND METHODS FOR PROVIDING QUALITATIVE INDICATION OF VIBRATION SEVERITY WHILE RECORDING |
| 326635-US-1 | Reference Signal Compensation For Magnetostrictive Sensor |
| 324904-JP-5 | MONITORING SYSTEMS FOR INDUSTRIAL MACHINES HAVING DYNAMICALLY ADJUSTABLE COMPUTATIONAL UNITS |
| 325018-US-1 | MONITORING SYSTEM WITH SERIAL DATA LANE TRANSMISSION NETWORK |
| 326635-CN-2 | Reference Signal Compensation For Magnetostrictive Sensor |
| 241625-EP-3 | MULTIVALUE BAR GRAPH DISPLAYS AND METHODS OF IMPLEMENTING SAME |
| 241625-DK-5 | MULTIVALUE BAR GRAPH DISPLAYS AND METHODS OF IMPLEMENTING SAME |
| 241625-DE-6 | MULTIVALUE BAR GRAPH DISPLAYS AND METHODS OF IMPLEMENTING SAME |
| 241625-SE-7 | MULTIVALUE BAR GRAPH DISPLAYS AND METHODS OF IMPLEMENTING SAME |
| 241625-CH-8 | MULTIVALUE BAR GRAPH DISPLAYS AND METHODS OF IMPLEMENTING SAME |
| 241625-GB-9 | MULTIVALUE BAR GRAPH DISPLAYS AND METHODS OF IMPLEMENTING SAME |
| 264507-EP-3 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 264507-DK-6 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 264507-DE-7 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 264507-SE-8 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 264507-CH-9 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 264507-GB-10 | METHODS AND APPARATUS FOR CONFIGURING A DATA ANALYZER |
| 507688-US-1 | Card Module |
| 502757-CN-3 | Field Calibration for Torsional Vibration Transducer |
| 323662-EP-3 | PROXIMITY SENSING SYSTEM WITH COMPONENT COMPATIBILITY TESTING |
| 323662-DK-6 | PROXIMITY SENSING SYSTEM WITH COMPONENT COMPATIBILITY TESTING |
| 323662-DE-7 | PROXIMITY SENSING SYSTEM WITH COMPONENT COMPATIBILITY TESTING |
| 323662-SE-8 | PROXIMITY SENSING SYSTEM WITH COMPONENT COMPATIBILITY TESTING |
| 323662-CH-9 | PROXIMITY SENSING SYSTEM WITH COMPONENT COMPATIBILITY TESTING |
| 325069-JP-5 | MONITORING SYSTEM WITH MULTIDROP BACKPLANE SCHEDULER |
| 325018-JP-5 | MONITORING SYSTEM WITH SERIAL DATA LANE TRANSMISSION NETWORK |
| 326065-US-1 | EXCEPTION-BASED ROUTE PLAN GENERATION |
| 324947-JP-5 | FLEXIBLE CONDITION MONITORING OF INDUSTRIAL MACHINES |
| 325017-JP-5 | MONITORING SYSTEM WITH BRIDGES FOR INTERCONNECTING SYSTEM ELEMENTS |
| 319550-CN-2 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 319550-JP-4 | IMPROVED GAP COMPENSATION FOR MAGNETOSTRICTIVE TORQUE SENSORS |
| 318567-EP-2 | NON-CONTACT MAGNETOSTRICTIVE SENSOR WITH GAP COMPENSATION FIELD |
| 318567-DK-3 | NON-CONTACT MAGNETOSTRICTIVE SENSOR WITH GAP COMPENSATION FIELD |
| 318567-DE-4 | NON-CONTACT MAGNETOSTRICTIVE SENSOR WITH GAP COMPENSATION FIELD |
| 318567-SE-5 | NON-CONTACT MAGNETOSTRICTIVE SENSOR WITH GAP COMPENSATION FIELD |
| 318567-CH-6 | NON-CONTACT MAGNETOSTRICTIVE SENSOR WITH GAP COMPENSATION FIELD |
| 506694-US-2 | Shadow Function for Protection Monitoring Systems |
| 506037-US-2 | TRIAXIAL ACCELEROMETER MOUNTING ADAPTER |
| 278083-EP-2 | NON-CONTACT MAGNETOSTRICTIVE SENSORS AND METHODS OF OPERATION OF SUCH SENSORS |
| 278083-DK-4 | NON-CONTACT MAGNETOSTRICTIVE SENSORS AND METHODS OF OPERATION OF SUCH SENSORS |
| 278083-DE-5 | NON-CONTACT MAGNETOSTRICTIVE SENSORS AND METHODS OF OPERATION OF SUCH SENSORS |
| 278083-SE-6 | NON-CONTACT MAGNETOSTRICTIVE SENSORS AND METHODS OF OPERATION OF SUCH SENSORS |
| 278083-CH-7 | NON-CONTACT MAGNETOSTRICTIVE SENSORS AND METHODS OF OPERATION OF SUCH SENSORS |
| 318784-JP-4 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 507698-US-1 | SENSOR CIRCUIT DIAGNOSIS |
| 327440-US-1 | Differential Noise Cancellation |
| 272877-EP-2 | AUTOMATED DATA OVERLAY IN INDUSTRIAL MONITORING SYSTEMS |
| 272877-DK-4 | AUTOMATED DATA OVERLAY IN INDUSTRIAL MONITORING SYSTEMS |
| 272877-DE-5 | AUTOMATED DATA OVERLAY IN INDUSTRIAL MONITORING SYSTEMS |
| 272877-SE-6 | AUTOMATED DATA OVERLAY IN INDUSTRIAL MONITORING SYSTEMS |
| 272877-CH-7 | AUTOMATED DATA OVERLAY IN INDUSTRIAL MONITORING SYSTEMS |
| 272877-GB-8 | AUTOMATED DATA OVERLAY IN INDUSTRIAL MONITORING SYSTEMS |
| 325257-JP-5 | GATED ASYNCHRONOUS MULTIPOINT NETWORK INTERFACE MONITORING SYSTEM |
| 265314-IN-4 | SECURE SYSTEMS AND METHODS FOR MACHINE MONITORING |
| 278083-US-3 | NON-CONTACT MAGNETOSTRICTIVE SENSORS AND METHODS OF OPERATION OF SUCH SENSORS |
| 325017-US-6 | MONITORING SYSTEM WITH BRIDGES FOR INTERCONNECTING SYSTEM ELEMENTS |
| 509127-EP-2 | Integrated Heat Sink for BlueFin |
| 509127-EP-4 | Integrated Heat Sink for BlueFin |
| 247834-IN-4 | METHOD AND SYSTEM FOR DETECTION OF MACHINE OPERATION STATE FOR MONITORING PURPOSES |
| 507689-US-1 | Instrument Panel |
| 325556-US-1 | MONITORING MACHINE VIBRATION |
| 275918-EP-2 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 275918-DK-4 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 275918-DE-5 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 275918-SE-6 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 275918-CH-7 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 275918-GB-8 | REVERSE ROTATION DETECTION IN ROTATING MACHINERY |
| 324947-US-6 | FLEXIBLE CONDITION MONITORING OF INDUSTRIAL MACHINES |
| 320171-SA-5 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |
| 508123-US-2 | SIGNAL DISPLAYS |
| 248043-EP-3 | COMPUTING DEVICE AND METHODS OF PRESENTING DATA TO IDENTIFY FAULTS WITHIN POWER SYSTEMS |
| 248043-DK-5 | COMPUTING DEVICE AND METHODS OF PRESENTING DATA TO IDENTIFY FAULTS WITHIN POWER SYSTEMS |
| 248043-DE-6 | COMPUTING DEVICE AND METHODS OF PRESENTING DATA TO IDENTIFY FAULTS WITHIN POWER SYSTEMS |
| 248043-SE-7 | COMPUTING DEVICE AND METHODS OF PRESENTING DATA TO IDENTIFY FAULTS WITHIN POWER SYSTEMS |
| 248043-CH-8 | COMPUTING DEVICE AND METHODS OF PRESENTING DATA TO IDENTIFY FAULTS WITHIN POWER SYSTEMS |
| 248043-GB-9 | COMPUTING DEVICE AND METHODS OF PRESENTING DATA TO IDENTIFY FAULTS WITHIN POWER SYSTEMS |
| 325556-EP-2 | MONITORING MACHINE VIBRATION |
| 325556-DK-3 | MONITORING MACHINE VIBRATION |
| 325556-DE-4 | MONITORING MACHINE VIBRATION |
| 325556-SE-5 | MONITORING MACHINE VIBRATION |
| 325556-CH-6 | MONITORING MACHINE VIBRATION |
| 324904-US-6 | MONITORING SYSTEMS FOR INDUSTRIAL MACHINES HAVING DYNAMICALLY ADJUSTABLE COMPUTATIONAL UNITS |
| 508144-US-4 | Torsional-Lateral Cross-Coupling Detection |
| 270607-DK-7 | SYSTEMS AND METHODS FOR MONITORING ROTARY EQUIPMENT |
| 314027-EP-3 | SYSTEMS AND METHODS FOR PRIORITIZING AND MONITORING DEVICE STATUS IN A CONDITION MONITORING SOFTWARE APPLICATION |
| 314027-DK-4 | SYSTEMS AND METHODS FOR PRIORITIZING AND MONITORING DEVICE STATUS IN A CONDITION MONITORING SOFTWARE APPLICATION |
| 314027-DE-5 | SYSTEMS AND METHODS FOR PRIORITIZING AND MONITORING DEVICE STATUS IN A CONDITION MONITORING SOFTWARE APPLICATION |
| 314027-SE-6 | SYSTEMS AND METHODS FOR PRIORITIZING AND MONITORING DEVICE STATUS IN A CONDITION MONITORING SOFTWARE APPLICATION |
| 314027-CH-7 | SYSTEMS AND METHODS FOR PRIORITIZING AND MONITORING DEVICE STATUS IN A CONDITION MONITORING SOFTWARE APPLICATION |
| 314027-GB-8 | SYSTEMS AND METHODS FOR PRIORITIZING AND MONITORING DEVICE STATUS IN A CONDITION MONITORING SOFTWARE APPLICATION |
| 506037-EP-3 | TRIAXIAL ACCELEROMETER MOUNTING ADAPTOR |
| 506037-DK-4 | TRIAXIAL ACCELEROMETER MOUNTING ADAPTOR |
| 506037-FR-5 | TRIAXIAL ACCELEROMETER MOUNTING ADAPTOR |
| 506037-DE-6 | TRIAXIAL ACCELEROMETER MOUNTING ADAPTOR |
| 506037-CH-7 | TRIAXIAL ACCELEROMETER MOUNTING ADAPTOR |
| 506037-GB-8 | TRIAXIAL ACCELEROMETER MOUNTING ADAPTOR |
| 225010-IN-5 | SYSTEM AND METHODS FOR USE IN PROVIDING A SENSOR SIGNAL INDEPENDENT OF GROUND |
| 318781-CN-4 | Communicating Alarm Trigger Status |
| 507733-US-4 | Customizable Workflows for Machinery Management |
| 326064-US-2 | SYSTEMS AND METHODS FOR DYNAMICALLY GROUPING DATA ANALYSIS CONTENT |
| 508769-US-1 | EVENT VISUALIZATION FOR ASSET CONDITION MONITORING |
| 325257-US-6 | GATED ASYNCHRONOUS MULTIPOINT NETWORK INTERFACE MONITORING SYSTEM |
| 507920-US-2 | MAGNETIC SENSOR WITH AUTOMATIC BALANCE CIRCUITRY |
| 325018-CN-3 | MONITORING SYSTEM WITH SERIAL DATA LANE TRANSMISSION NETWORK |
| 507927-US-1 | IMPEDANCE SENSOR |
| 507957-US-2 | CLOSED LOOP CONTROL EMPLOYING MAGNETOSTRICTIVE SENSING |
| 327440-US-5 | Differential Noise Cancellation |
| 318784-EP-3 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318784-DK-5 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318784-DE-6 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318784-SE-7 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318784-CH-8 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 318784-GB-9 | NON-CONTACT MAGNETOSTRICTIVE SENSOR ALIGNMENT |
| 507731-CN-3 | HUMAN MACHINE INTERFACE GENERATION FOR INDUSTRIAL MONITORING |
| 327440-CN-4 | Differential Noise Cancellation |
| 502757-US-5 | Field Calibration for Torsional Vibration Sensor |
| 325047-CN-3 | INTEGRATION OF DIAGNOSTIC INSTRUMENTATION WITH MACHINE PROTECTION SYSTEM |
| 320961-EP-2 | EVENT LIST MANAGEMENT SYSTEM |
| 508767-US-1 | EVENT VISUALIZATION FOR ASSET CONDITION MONITORING |
| 507731-EP-4 | HUMAN MACHINE INTERFACE GENERATION FOR INDUSTRIAL MONITORING |
| 502481-US-2 | Method of Predicting Failure Events for Reciprocating Compressors |
| 507733-CN-2 | Customizable Workflows for Machinery Management |
| 508144-CN-2 | Torsional-Lateral Cross-Coupling Detection |
| 326065-CN-2 | EXCEPTION-BASED ROUTE PLAN GENERATION |
| 326635-US-4 | Reference Signal Compensation For Magnetostrictive Sensor |
| 509127-CN-3 | Integrated Heat Sink for BlueFin |
| 247777-IN-6 | METHOD AND SYSTEM OF A SENSOR INTERFACE HAVING DYNAMIC AUTOMATIC GAIN CONTROL DEPENDENT ON SPEED |
| 325017-US-7 | MONITORING SYSTEM WITH BRIDGES FOR INTERCONNECTING SYSTEM ELEMENTS |
| 248424-DE-3 | METHODS AND APPARATUS FOR MONITORING OPERATION OF A SYSTEM ASSET |
| 506694-CN-3 | Shadow Function for Protection Monitoring Systems |
| 507733-EP-3 | Customizable Workflows for Machinery Management |
| 508144-EP-3 | CROSS-COUPLING DETECTION BETWEEN TORSIONAL AND LATERAL VIBRATIONS |
| 325017-EP-4 | MONITORING SYSTEM WITH BRIDGES FOR INTERCONNECTING SYSTEM ELEMENTS |
| 324730-CN-3 | FLEXIBLE AND SCALABLE MONITORING SYSTEMS FOR INDUSTRIAL MACHINES |
| 325017-CN-3 | MONITORING SYSTEM WITH BRIDGES FOR INTERCONNECTING SYSTEM ELEMENTS |
| 325047-EP-4 | INTEGRATION OF DIAGNOSTIC INSTRUMENTATION WITH MACHINE PROTECTION SYSTEM |
| 320171-GB-11 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |
| 320171-EP-4 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |
| 320171-FR-7 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |
| 320171-DE-8 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |
| 320171-SE-9 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |
| 320171-CH-10 | OIL AND GAS INDUSTRIAL MACHINE MONITORING |