Highlights
Benefits
- Saves rig time and costs by reducing two e-line trips to one
- Reduces HSE risk with surface rigging reduced by 50%
- Enhanced reliability with electro-mechanical cutting activated immediately after free pipe determination
- Precisely cuts pipe without the use of ballistics or hazardous chemicals
Features
- Industry leading free-pipe detection and electro-mechanical cutting technology in a single trip
- Deployed by PRIME 212 & PRIME 338 tractor and integrated with the PRIME Release Sub System (RSS)
- Easily mobilized inside a peli case via road, sea, or air to the wellsite
Applications
- Drilling pipe recovery
- Well intervention
- Plug & abandonment
Overview
Traditionally, a pipe recovery operation involved identifying the free-pipe depth (diagnosis) of a stuck drilling bottom hole assembly (BHA) or tubular with a dedicated wireline trip in the well. This is then followed by a separate trip for a cutter or back-off (treatment).
Certia Log & Cut, combines two industry leading technologies for pipe recovery, enabling a single-trip, multi-task solution.
Safer operations
Deploying Certia with an electro-mechanical cutter in a single trip removes two surface events from the operational scope (rig down run 1, rig up run 2).
Faster operations
Combining two wireline trips into one can result in a 50% reduction in operational time for the pipe recovery along with a subsequent reduction in carbon emissions.
Well control
Single run pipe recovery operation can half the duration of time the wireline is across the drilling BOP. Once the free-pipe depth has been identified, switching to cutting mode can be done instantly minimizing any risk of stuck depth migrated shallower.
Deployment
The Certia Log & Cut solution is deployed by PRIME 212 and PRIME 338 tractor and integrated with the PRIME Release Sub System (RSS).
Rapid mobilization
Certia Log & Cut solution is easily mobilized inside a pelicase transportable via road, sea, or air to the wellsite.